Ceramic coatings

The ceramic coating – a multi-talent

Ceramic coatings on steel or aluminium construction parts show excellent properties. They are resistant to wear, low-friction and have an electrical and thermal insulation effect. The ceramic layers are applied through thermal spraying with a standard thickness of 120 μm.

With longer machine runtimes, they contribute to lowering costs and safeguard the quality of your products through long-term stable surfaces.

As a competent partner for ceramic coatings, Rauschert in addition is also a competitive supplier of construction parts from technical ceramics and plastics.

Manufacturing procedures

Manufacturing procedures

The ceramic coatings are applied with a thermal spraying procedure to the pre-processed metal surface and post-processed, depending on the application case. Thick-walled metal parts heat up to approx. 200 °C, so that no structural changes occur. One advantage is the free selection of the basic metallic material.

Coating on the inside is only possible if the area to be coated is accessible by the spray jet and the angle of incidence is > 45 °.

Applications

Applications

Ceramic coatings outperform hard-chrome layers in terms of hardness and wear resistance and have proven highly successful in numerous applications: Among other things, in textile engineering and wiring machine engineering, in appliances for soldering and welding, in electrical insulation layers on heating conductors up to approx. 500 V and 600 °C and for thermal insulation layers in the glass-processing industry.

In humid, corrosive surroundings, corrosion-resistant substrate materials such as stainless steel 1.4301 and aluminium are recommended due to the process-dependent porosity. In addition, the pores are impregnated with organic and inorganic sealants.

Antibacterial, so-called “bactericidal” coatings, applied on various surfaces, enable new prospects in the combat of bacteria and fungi. Bactericidal coatings on doorknobs have the potential to reduce the risk of contagion considerably.

Enquiries

Enquiries

We will be pleased to draw up an offer for you! For this purpose, we request a customer specification drawing, with details of quantities and required tolerances.

For very small tolerances the parts have to be grinded.

Contact person

Contact person

Mr. Hans-Jürgen Wolf

Rauschert Heinersdorf-Pressig GmbH
Bahnhofstraße 1
D-96329 Pressig

+49 9265 78-329
+49 9265 78-10842
h.wolf@prg.rauschert.de

You have questions?

Use our enquiry form